Click on any of the informational videos below for additional information or "how to" advice in product use and best practice usage. If you require additional information please call
Jim Stoll at 314-239-8887
Instruction videos found below
Educational Videos found below
FEATURES AND BENEFITS
Eliminates Water & Particles
Water will always be present because of the heating and cooling of components in an engine. Diesel fuel used as the source of combustion contains sulfur. Small amounts of fuel will pass by the piston rings and
end up in the oil. The sulfur will mix with the water resulting in sulfuric acids. Using the Kleenoil Filtration System will remove all water down to less than 0.05%, reducing the formation of sulfuric acid that will cause accelerated wear to engine components.
Removes Dirt and Contaminants
Dirt and wear metals will always be present in Hydraulic and Engine oil. The reasons that most fluid changes are done is to get rid of the dirt and contaminants. Conventional fluid filtration components will filter the fluid down to approximately 25-40-micron in size. Accelerated wear and damage occurs somewhere around 3-6 micron. Using the Kleenoil Filtration System you will filter the fluid down to 1-micron (3 absolute) in size reducing the chance of wear and ultimately reducing the number of engine failures and
rebuilds that would have needed to be performed during the life of the unit.
Doesn’t Remove Desirable Elements
Certain components are purposely placed in lubrication oil to make it effective. Some of the additives include dispersants, detergents, oxidation and rust inhibitors, pour-point depressants, metal deactivators,
and anti-foaming and gelling agents. While the Kleenoil Filtration System is removing dirt, contaminants, wear metal particles and water; it is not removing the oil additives needed for continued use.